AltroColor PU 1900

• field of application: polyurethane ether systems
• chemical basis: polyether polyol
• reactivity: OH-number: 10-40 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor EP 2000

• field of application: epoxy resin systems
• chemical basis: bisphenol A/F resin
• reactivity: EEW-value: 200-400 g/eq. (depending on the pigment content and/or color shade)

AltroColor PU 3000

• field of application: polyurethane ether systems
• chemical basis: polyether polyol
• reactivity: OH-number: 10-40 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor P 4500 / P 4600

• field of application: polyurethan systems, polymer concrete; „AgBB“ compliant; BfR and FDA compliant on demand
• chemical basis: plant oil based on renewable primary products
• reactivity: OH-number: 80-130 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor PU 5000

• field of application: polyurethan ester systems; 1-C systems; unsaturated polyester
• chemical basis: hydrocarbon resin
• reactivity: OH-number: max. 5 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor PU 5000 - coloring of nylon systems

• field of application: nylon (polyamide)
• chemical basis: hydrocarbon resin
• reactivity: OH-number: max. 5 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor PAS 7000

• field of application: polyaspartics
• chemical basis: polyaspartic ester
• reactivity: amine number: 50-200 mg KOH/g (depending on the pigment content and/or color shade)

AltroColor PEA 8000

• field of application: polyurea systems
• chemical basis: polyoxyalkylene amine
• reactivity: amine number: 15-45 mg KOH/g (depending on the pigment content and/or color shade)

NEUKASIL SN Farbpasten

NEUKASIL SN Color Pastes are based on a vinyl polymer and have been developed particularly for the coloring of RTV-2 Silicone Rubber Systems. Therefore a complete compatibility is ensured – without any by-products, which might migrate or have any other kind of influence on the material properties.
NEUKASIL SN Color Pastes have no or only a little influence on the Shore A-hardness (depending on the hardener variant used) and the other mechanical, chemical and electrical properties.