Certified according to ISO 9001

Altropol quality management sytem certified according to DIN EN ISO 9001:2008.

You can download our certificate here.

Altropol - Zugelassener Wirtschaftsbeteiligter
(AEO - Authorized Economic Operator)

Certifikate Number: DE AEOC 120779

Altropol is a member of the network NanoCarbon

The Altropol technology center was supported by

COMPOSITES EUROPE 29th of Nov - 1st Dec 2016 in Düsseldorf, Germany

Visit us ath the Composites Europe 2016 and take the opportunitiy to talk to our application engineers about our portfolio as 



NEUKADUR epoxyresins- und polyurethanes,

NEUKASIL RTV-Silicones as well as

ALTROCOLOR colour pastes


new developments and products.



We are looking foward to your visit at out booth nr. 8a/C11.


  • 2-C PUR Casting Elastomer
  • very high restoring force
  • very good flow properties
  • for prototyping
  • for production of technical parts
  • for all kinds of moulds and patterns
Further information see

NEUKADUR MultiCast 8 with hardener ISO 25

  • curing to be white
  • 2 C-PUR Fast-cast System
  • low shrinkage
  • universally usable for all kinds of moulds and patterns
Further information see Datenblatt

Altropol supports the Hawks Racing Team

Altropol is a long-standing supporter of the Hawks Racing e.V., the Formular Student team from the university of applied sciences in Hamburg.
Also in this year has the Hawks-Team buildt their race-car with the help of our NEUKADUR EP 986 vacuum infusion resin and our application service. Our NEUKADUR EP 986 was used for producing the monocoque as well as the coupling and gear pedal.
We wish the Hawks-Racing team for the current season good luck and the best rankings!

Impressions from the Composites Europe 2015

We're looking forward to see you again at the Composites Europe 2016 at Düsseldorf.


- 1 : 1 System
- Shore A 34
- fast through-curing
- good resistance to initial tearing and tear propagation
- very good flow properties
- can be made thixotropic
Further information see

NEUKADUR Spray Adhesive VP

  • high-performance spray adhesive
    for the positioning of reinforcement and core materials
  • short flash-off time
  • high yield (approx. 1.3 qm² per 100 ml)

Spray Adhesive for the processing in the infusion and RTM process with epoxide, polyester and vinyl ester resins. Also usable for prepreg processing.
Further information see Datenblatt


Mould making silicon of the new generation

- Low viscosity, therefore good flowability and venting
- Two crosslinker for different processing times
- Can be made thixotropic
- High resistance to tear propagation and elongation

Further information see